E07-m1101d Pinout High Quality
The E07-M1101D pinout consists of a 7x7 pin grid array, with a total of 49 pins. The pin configuration can be divided into several categories:
: Download Ebyte’s configuration software (RF_Setting.exe), experiment with GDO2 as an interrupt for packet reception, and explore the module’s wake-on-radio capabilities for battery-powered projects. e07-m1101d pinout
Are you working with the e07-m1101d chip and struggling to decipher its pinout? Look no further! This blog post aims to provide a clear and concise overview of the e07-m1101d pinout, helping you to better understand and work with this electronic component. The E07-M1101D pinout consists of a 7x7 pin
| Pin | Name | Type | Description | |-----|-------------|-----------|-----------------------------------------------------------------------------| | 1 | ANT | RF I/O | Antenna port (50 Ω). Connect directly or via a matching network. | | 2 | GND | Power | Ground – must be connected to system ground plane. | | 3 | 3.3V | Power | Main supply (2.2 V – 3.6 V, typical 3.3 V). Requires 100 mA peak current. | | 4 | RST | Input | Active-low reset. Pull to GND to reset, then float or pull high. | | 5 | SCK | Input | SPI clock (max 10 MHz). Idle low, data sampled on rising edge. | | 6 | MISO | Output | SPI Master-In Slave-Out. Tri-stated when not selected. | | 7 | MOSI | Input | SPI Master-Out Slave-In. Sampled on clock rise. | | 8 | NSS | Input | SPI chip select (active low). Must be low for SPI communication. | | 9 | BUSY | Output | Busy indicator. High when module is processing (cannot accept commands). | | 10 | DIO0 | I/O | Digital I/O – configurable interrupt (e.g., TxDone, RxDone, CAD detected). | | 11 | DIO1 | I/O | Second interrupt line (e.g., FhssChangeChannel, RxTimeout). | | 12 | NC / GND | – / Power | No connect internally – but often PCB tied to GND. Check your vendor. | Look no further
The E07-M1101D pinout was no longer a mystery. It was a warning.
The E07-M1101D module is a compact yet powerful 433 MHz wireless transceiver based on Texas Instruments' chip. If you are working on DIY home automation, wireless sensor networks, or any other radio project with an Arduino or ESP32, understanding this module's pinout is the key to unlocking its potential. This article provides a complete technical reference for the E07-M1101D pinout , covering pin definitions, wiring examples, specifications, and troubleshooting tips.
