G41tad V10 Motherboard Manual Work Here

: Utilizes the Intel G41 North Bridge and Intel ICH7 South Bridge . Memory (RAM) : Type : Dual-channel DDR3 SDRAM. Slots : 2 x 240-pin DIMM sockets.

LGA 775 (Socket T) supporting Intel Core 2 Quad, Core 2 Duo, Pentium, and Celeron processors. g41tad v10 motherboard manual work

The G41TAD requires two power inputs to POST (Power On Self Test): A 24-pin ATX power connector. : Utilizes the Intel G41 North Bridge and

The front panel header is typically located at the of the board. Connect your case cables to the pins as follows: Pin Set Top Left PWR_LED Power Status Light (Polarity sensitive: + / -) Top Right PWR_SW Power Switch (Turns PC on/off; non-polarized) Bottom Left HDD_LED Hard Drive Activity Light (Polarity sensitive: + / -) Bottom Right RESET Reset Switch (Restarts PC; non-polarized) LGA 775 (Socket T) supporting Intel Core 2

Connect the 24-pin ATX main power cable and the 4-pin +12V CPU power cable. 💿 BIOS & Drivers Access BIOS: Tap Del or F2 during startup.

CPU and CPU Cooler (Ensure the 4-pin CPU fan is plugged into CPU_FAN ).