If the projector doesn’t recognize the USB drive or freezes during the update:
: Turn on the projector. The system should automatically detect the firmware file on the USB drive. viewsonic m1 mini firmware update top
Follow these steps meticulously to perform your firmware update. The entire process takes about five to ten minutes. If the projector doesn’t recognize the USB drive
Once the USB drive is prepared, the physical installation process begins. With the projector powered on, the USB drive is inserted into the side port. Using the remote control or the onboard navigation buttons, the user must navigate through the system settings menu to the "Software Update" section. Selecting the "USB Update" option triggers the projector to scan the connected drive for the compatible binary file. Upon finding the file, the system will prompt the user for confirmation. It is critical at this stage to allow the progress bar to reach completion without interference; the projector will often reboot automatically once the installation is finished. The entire process takes about five to ten minutes